This is very cool and easy to use LED strip, you just need to connect this AC 110V RGB LED strip to led controller and plug the controller in power, then it will work.
Light source: SMD 5050 LED
Light color: RGB
Working voltage: AC 110V
Width x thickness: approx 12.5 x 7.5mm
Length: 5 meters (16.4 feet) Which means: we sold this led strip at 5 Meters, if you need 100 meters, please purchase 20 pieces of this product.
If you need the light to be 20m/roll, or 30m/roll or 50m/roll, pls contact us at service@vozop.com right after you place the order.The Maximum extension length is 50 Meters (82 Feet) ,
which means you would run 50 meters as 1 roll.
Minimum cuttable length: 0.5 meter (AC 110V)
LED quantity: 60 LEDs per meter, total 300 LEDs for 5 meters
Power consumption: approx 14.4W per meter, total 72 watts
Protection rate: IP67 waterproof, Pls don't use this light in water
CRI: 80
Power factor: 0.9
Temperatures: -20 to 50 °
Beam angle: 120
Material: FPC
Life time: >50 000 hours
Certification: CE, RoHS
Package Include:
1 Roll of 5 Meters (16.4Feet) AC 110V SMD 5050 RGB LED Strip Light 5M 300-LEDs Waterproof Flex Tape
You would order the easy controller to control this 110V RGB LED strip as showing at following photo:
8 Different Modes of glimmering (Combination,In Waves,Sequential,Slo-glo,Chasing/Flash,Slow Fade,Twinkle/Flash,Steady On.)
Pls note: This controller is only for you to run the strips as different modes. You can not use this controller to choose 1 certain color,
if you want to choose the certain color then you should choose to order this controller.
If you want to control the light to be a certain color (Such as blue or red or yellow), you would use this ir remote to choose and control.
This following IR Remote Controller for AC 110V 220V RGB LED Light Strip scontroller as showing at following photo:
CE and RoHS approved
