SK6822 DC 5V Signal Break-Point Continuous 5050 30leds/m LED Strip 5M
Lighting Source: SMD 5050 RGB LED
Beam Angel: 120 degree
Operate Voltage: DC5V
Consumption Watt/M: 9 Watt (max)
Pixel Pitch (mm): P33.3mm
LEDs(Pixel)/M: 30 Pixels/m
IC chip: SK6822
PCB Color: White
PCB Width: 10mm
Working temperature -20℃-60℃
Storage temperature -30℃-80℃
Protection Rate: Pls Choose,
IP30 Non-Waterproof with 3M Tape on the back,
IP65 Waterproof Dripping Glue with 3M Tape on the back,
IP67 Waterproof Outer Casing Silicone without 3M Tape on the Back
Features
It comes in 5meters per reel with a 3Pin JST SM connector on both end and separated Power / Ground
Wires . Customized length is available as well .
Flexible PCB material . Each LED/Pixel can be cut , there is cut lines every 33.3 mm.
30LEDs/M . 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip .
10mm width PCB , 0.25mm thickness with 3M tape back side for non-weatherproof version . 12.5mm width, 4mm thick
with silicon tube for waterproof version .
Package Include:
1 Roll of 16.4ft (5Meters) SK6822 DC 5V Signal Break-Point Continuous 5050 30leds/m LED Strip 5M
CE and RoHS approved